High end X2 transceiver vs XENPAK transceiver Offered By Fiberstore

Fiberstore supply some high performance X2 transceiver,such as 10GBase-sr x2,10GBase-lr x2,10GBase-er x2,10GBase-zr x2 and so on.Now,inform you good info about X2 transceiver,it's a hot swappable products made for 10Gbps applications. Its development took it's origin from former Xenpak standards, X2 transceiver inner function is almost similar with Xenpak, and X2 also can use one transceiver to fulfill all 10G Ethernet optical port function. To expect half sized Xenpak, this enable it suit for density installations. X2 transceiver is 10G old generation transceiver that less and less employed by operators. Fiberstore X2 transceivers are fully compliant to IEEE 802.3ae standard for Ethernet and the 10GFC Rev. 4 Fibre Channel standard, making it ideally suited to 10 GbE datacom and storage area network (SAN / NAS).

Fiberstore give you the X2-10GB-ER can be a 10GBase-er x2 1550nm 40km transceiver module. The X2-10GB-ER transceiver module supplies a inexpensive high-performance connection. The X2-10GB-ER is 100% compatible with all Cisco series switches and modules which support X2 transceivers.The 10GBase-er we not only have X2 transceiver,but also have XENPAK transceivers,for instance,the kinds of 10GBase-er XENPAK.

XENPAK transceivers from Wikipedia state that the XENPAK is really a Multisource Agreement (MSA), instigated by Agilent Technologies and Agere Systems, that defines a fiber-optic or wired transceiver module which conforms for the 10 Gigabit Ethernet (10GbE) standard with the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group. The MSA group received input from both transceiver and equipment manufacturers throughout the definition process. XENPAK has been replaced by more compact devices supplying the same functionality.XENPAK modules were supplied for physical layer interfaces supporting multi-mode and single mode fiber optic cables and InfiniBand copper cables with connectors known as CX4. Transmission distances change from 100 metres (330 ft) to 80 kilometres (50 mi) for fiber and up to 15 metres (49 ft) on CX4 cable. Newer XENPAKs with all the 10GBase-LX4 standard operated using multiple wavelengths on legacy multi-mode fibres at distances as high as 300 metres (980 ft), eliminating the requirement to reinstall cable inside a building when upgrading certain 1 Gbit/s circuits to 10 Gbit/s.

Xenpak and X2 module are both from the Xenpak standard evolution. Its internal function modules are just do i think the Xenpak ,and the circuit board applications b are same too, also using one module to realize 10G Ethernet optical interface functions. Because of the the Xenpak light module is installed on the circuit board when the circuit board slotted to accomplish more complicated, can not reach the high-density applications. Most of the Xenpak and X2 optical modules volume improved after only Xenpak directly into the circuit board, it really is applied to high-density rack systems and PCI card applications.

Xenpak and X2 optical modules can offer 2 kinds of circuit interface: XAUI and Serial Framer Interface (SFI-4), may be used for10G Ethernet ,can also be useful for OC-192 SDH and 10GFC. It may be said Xenpak and X2 have very similar standard, X2 changes reflected within the rail system compared Xenpak. The generally think that the two specifications could eventually integrate.

Fiberstore features a plethora of fiber optic products in stock and will ship the transceivers to you within A day. All the optical transceiver are tested in-house prior to shipping to insure that they'll get to perfect physical and dealing condition. X2 transceiver vs XENPAK transceiver which transceiver won the competitions.Welcome to Fiberstore.