Are You Looking For X2 Transceivers Or XFP Transceivers

Are you looking for X2 transceivers or XFP transceivers? If so,to know some good info with them after which ahead to know how and where you can get transceivers at very affordable rates.

X2 was optical transceiver module class, As well as the XFP was optical transceivers class. Those two forms of optical modules reflects two different design ideas, both have their benefits and drawbacks: the advantages of optical transceiver module is extremely integrated circuit design to accomplish an easy circuit design engineers can give attention to system design, do not spend an excessive amount of energy for that realization with the devices about the circuit; drawback is the power use of large, bulky, limiting the number of optical modules attached to the PCB data products can not meet the requirements of port density. The optical transceivers benefit of small size, cheap, simple to apply high port density applications; disadvantage is the high requirements of circuit design inside the ordinary circuit board to accomplish an interest rate of 10 Gb / s, 12 in. transmission distance XFI interface.

With the advancement in technology, a growing number of equipment with latest techniques are now being introduced everyday. This transceiver might be a form factor hot pluggable component designed for 10G system applications consisting fiber channel in addition to 10Gig Ethernet.

FiberStore 10G X2 is a standardized form factor for 10 Gb/s fiber optic transponders which is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It really is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions can be obtained.Fiberstore supply the 10G X2 transceivers including 10GBase-sr x2,10GBase-lr x2,10GBase-er x2,10GBase-zr x2 and so on.Today,I'll introduct itroduction the 10GBase-lr xfp and 10GBase-er xfp to suit your needs.

The developed recognized standard because of this transceiver is called XFP multi source agreement (MSA), that has been created by various companies including Cisco XFP, Juniper XFP, Brocade XFP.FiberStore XFP transceiver is a high end, affordable modules for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s.Consistent with the original XFP multi-source agreement (MSA), these hot-pluggable transceivers possess a common mechanical specification, pinout, and management interface, and fasten to duplex fiber with "LC" connectors.

Fiberstore 10GBase-er xfp transceiver comply with XFP MSA, and can support diverse applications for SDH/Sonet equipment including FEC (9.95Gb/s to 10.7Gb/s), in addition to Ethernet Lan (10.325Gb/s) and WAN(9.95Gb/s) applications. The high performance cooled 1550nm cooled EML transmitter and sensitivity PIN receiver provide superior performance for SONET/SDH and Ethernet applications at approximately 40km links. Digital diagnostics functions can be obtained using a 2-wire serial interface, as specified in the XFP MSA.

Fiberstore 10GBase-lr xfp is hot swappable fiber optic transceiver employed for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data rate from 9.95Gbps to 11.1Gbps, max working distance of the XFP LR fiber transceiver is 10km. XFP-10GLR-OC192SR use dual LC fiber connector interface, its working climate is from -5 to 70 degree centigrade, this fiber transceiver module is to use uncooled 1310nm EML laser and power dissipation lower than 2.5W. The XFP LR is to use integrated digital diagnostic functions. The 10GBase-LR transceivers operate in a 1310nm optical wavelength, and so are created for 9μm (9/125) single-mode fiber as much as 10km, but they are widely used up to larger distances with high-quality fiber.

Fiberstore is really a fiber optic transceivers supplier having a number of fiber optic products in stock prepared to ship for you. If you want to learn more information about our powerful Cisco XFP transceivers, you are able to visit Fiberstore.com or call us via sales@fiberstore.com directly.