OTDR (optical time-domain reflectometer ) is classic fiber optic test equipment employed to characterize an optical fiber. The specification of the dynamic range need to be carefully considered for two people reasons:

First, Fiberstore OTDR dynamic range laid out in different ways (including jamming with specifications pulse amplitude, signal-to-noise ratio, averaging time, etc.). Phone connection, and to find out them thoroughly and steer clear of making comparisons unsuitable.

And, secondly, produce an insufficient dynamic range makes for a lack of ability to measure the full link length, affecting, often, the precision belonging to the link loss and connector losses and attenuation far end . A great device is to settle on an OTDR empirical whose dynamic range is 5 to eight dB over the most loss you'll find.

One example is, a singlemode OTDR by having a dynamic selection of 35 dB incorporates a useable dynamic collection of about 30 dB. Assuming a typical fiber attenuation of 0.20 dB / km at 1550 nm and splices every 2 km (0.1 dB loss per splice), one of this nature can accurately certify distances as much as 120 km.

As compared, a single-mode OTDR by using a dynamic spread of 26 dB is known for a usable dynamic selection of about 21 dB. Assuming a common attenuation of 0.5 dB / km at 1300 nm and 2 connector loss around 1 dB each, this device may accurately certify distances close to 38 km.Fiberstore supply some otdr brands such as YOKOGAWA otdr(ODTR AQ1200),Shinewaytech otdr,JDSU otdr,EXFO otdr et cetera.

Optical power meter is actually a essential fiber test instrument put to use in absolute optical fiber power measurement as well as fiber optic loss related measurement. Fiberstore have comprehensive optical power meter products,for example,you'll find two models like 3208,JW3208A and JW3208C.And also optical power meter 3208 price is inexpensive and quality from fiberstore.

The primary model JW3208A in fiberstore of Fiber Optic Meter is usually a rugged, versatile, easy to use, high precision meter, which can be high tech in design and gratifaction, and lower in cost. This Fiber Optic Meter has become devised for todays, and tomorrow's application. Calibrated at 850nm, 980nm, 1300nm, 1310nm, 1490nm, and 1550nm, the Model 3208A is measurement-ready on the traditional LAN, Telecom and CATV wavelength windows, and also newer 1490nm out-of-band requirements.

The second model in fiberstore JW3208C High Power Fiber Optic Meter is known as a rugged, versatile, simple to operate, high precision meter, that could be cutting-edge in design and also gratification, and less cost. This Fiber Optic Meter has long been designed for todays, and tomorrow's application. Calibrated at 850nm, 980nm, 1300nm, 1310nm, 1490nm, and 1550nm, the Model 3208C is measurement-ready with the traditional LAN, Telecom and CATV wavelength windows, along with the newer 1490nm out-of-band requirements.

Fiberstore provide test equipment including about Network cable tester, phone tester, fiber cable stripper, fiber cable slitter, crimping tool, fiber optic cutter, punch down unit and so forth.If you need to learn more information in test equipment ,it is possible to click our website: www.fiberstore.com .

FiberStore offers many different types of fiber optic test equipment. They can be as follows: Visual Fault Locator, Optic Power Meter, Fiber Light, Fiber Optic Identifiers, OTDR, Fiber Optic Multimeter ect.

Visual Fault Locator:

Fiberstore visual fault locators are a kind of device which can be ready to locate the breakpoint, bending or cracking of this fiber glass. This may also locate the fault of OTDR dead zone making fiber identification within one end to the other end. Designed with a FC,SC,ST universal adapter, this fiber fault locator can be used without the need for other kind more adapters, it could actually locates fault around 10km in fiber cable, with compact dimensions, not heavy, red laser output. There is top notch, high reliability, small size and solid but easy operation. It could possibly identify fiber and locate down to single mode or multimode fiber from the fiber system of fiber network, LAN, FDDI, ATM and it's really an elementary tool of system maintenance for telecom network system.

Fiber visual fault locator add the pen type, the hand-held type and portable visual fiber fault locator. Fiberstore also offer a new variety of laser visual fault locator, it could locates fault around 30km in fiber cable.

Optical Power Meter:

Fiberstore optical power meter (OPM) is really a device designed to study the power inside of an optical signal. The concept of a usually represents a tool for testing average power in fiber optic systems. Other general purpose light power measuring tools are usually called radiometers, photometers, laser power meters, light meters or lux meters.

The average optical power meter includes calibrated sensor, measuring amplifier and display. The sensor primarily has a photodiode selected for your appropriate selection of wavelengths and power levels. In the display unit, the measured optical power and place wavelength is displayed. Power meters are calibrated running a traceable calibration standard maybe a NIST standard.

OTDR:

Fiberstore optical time-domain reflectometer (OTDR) is definitely optoelectronic instrument would once characterize an optical fiber. An OTDR injects numerous optical pulses inside the fiber under test. This also extracts, through the same end for the fiber, light that is definitely scattered (Rayleigh backscatter) or deflected from points over the fiber. (It's akin to how be sure you time-domain reflectometer measures reflections attributable to modifications in the impedance for the cable under test.) The strength of the return pulses is measured and integrated in the form of purpose of time, which is plotted like a function of fiber length.

Fiberstore can be a Fiber Optic Tester supplier by having a various fiber optic products available wanting to ship to your account. If you want to learn about understanding of our high quality Fiber Optic Tester, you could head to fiberstore.com .

The rapid increase of information construction, the growing consideration in data, voice, image and multimedia communications, Ethernet broadband access therefore be defined the increasingly important position. Traditional Category 5 cable are only allowed to Ethernet electrical signal transmission 100 meters transmission distance and coverage is actually not able to meet the requirements of the actual network environment. While doing so, the optical fiber communication with their information capacity, security and good size, lightweight, small size, relay, telephone long distance transmission, etc. to obtain a variety of applications, fiber optic transceivers will be the entry to this high-speed fiber-optic transmission medium a great choice towards problem of Ethernet inside transmission.

Fiberstore SFP ( small form-factor pluggable ) can be quite a small, pluggable transceiver, for telecommunication files communications applications. Its of the optical fiber or maybe the like some copper cable associated with the network device motherboard ( switch, router, media converters or similar device). This may be a popular many network component suppliers to develop and have the industry format. SFP transceiver design, supports Gigabit Ethernet, fibre channel, SONET, as well as communications standards. For the small size, SFP eliminated before omnipresent Gigabit interface converter ( GBIC );the SFP is oftentimes, erroneously, often called 'Mini-GBIC' (although no such device has lots of persons defined while in the MSAs).

Fiberstore SFP transceivers are available by having a assortment of transmitter and receiver types, allowing users to select the best transceiver for any url to supply you with the required optical reach over the available optical fiber type (e.g. multi-mode fiber or single-mode fiber).

FiberStore produce and stock for that full range of optical transceivers,optical transceivers including about SFP (SFP Plus), X2, XENPAK, XFP, SFP (Mini GBIC)and GBIC, CWDM, DWDM, PON. Hot selling optical transceivers not only SFP Transceiver ,but also X2 Transceiver(X2-10GB-SR) from Fiberstore.

Fiberstore X2-10GB-SR fiber optic transceiver module support a website link of max 300 meters via multimode fiber. It can be utilised in 10Gigabit applications including Ethernet and Fibre channel. We feature Cisco compatible X2 10GB SR transceivers that happen to be utilized in 10 GB short reach applications.

Fiberstore Cisco X2-10GB-SR use 850nm wavelength and it's also with SC duplex connector interface, power consumption is 1.8 W. all our X2 10GB SR transceivers are tested with equipment from Cisco together with other companies to be certain in the compatibility.

FiberStore is really a worldwide professional supplier in selling fiber optic communication products, who may be providing a vast spread of connectivity ways to the telecommunications, military, industrial, data storage, broadcast as well as networking industries,our fiber optic products within fiber patch cable,fiber optic transceivers,fiber optic tester(just like Optical Power Meter JW3208,the optical power meter 3208 price was less costly than other supplier),fiber optic tool and the like.Should you interesting in Optical Power Meter JW3208,your pet land theme fiberstore or via sales@fiberstore.com get in touch with us.

The Cisco Small Form-Factor Pluggable (SFP) industry-standard Gigabit Interface Converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot,linking the port with the network.Fiberstore Cisco SFP is also hot plugable, this make it easy to change and easy for maintenance compared with traditional modules. SFP fiber transceiver modules make the fiber optic network or fiber-Ethernet network easier to upgrade or maintain, users can replace a single SFP module during the process instead of replace the whole board with many modules on it.

CWDM-SFP-1310:

Fiberstore CWDM SFP is a hot-swappable input/output device that plugs into an SFP port or slot of a Cisco switch or router, linking the port with the fiber-optic network.The CWDM SFPs are multi-rate parts that support both Gigabit Ethernet and Fibre Channel (1 gigabit and 2 gigabit).

Fiberstore CWDM-SFP-1310 Cisco Compliant 1000BASE-CWDM SFP transceivers are designed to work in any Cisco switch thats uses SFP CWDM modules. These transceivers are used to connect a single mode fiber optic cable at a wavelength of 1310nm.

Manufacturer: FiberStore Product Type: SFP transceiver module Data Rate: 1.25Gbps Wavelength: 1310nm Transfer Distance:70km Connector Type: LC Duplex Cable Type: Single-Mode Fiber (SMF)

Cisco GLC-T:

Fiberstore cisco glc-t sfp is 1000Base SFP fiber optic transceiver module via Category 5 copper line, Cisco GLC T fiber transceiver provide 1Gbps data transfer and it provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure. This product is guaranteed to work with any product a Cisco original would work with. These transceivers are used to connect copper Cat5e or Cat6 up to 100 meters.

The cisco glc t datasheet is including about 1Gbps,Connector Type: RJ45,Cable Type: Copper and so on.

FiberStore offers cost-effective standards-based compatible cisco SFP Transceivers.All of our Cisco SFP module are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition. Fiberstore not only CWDM-SFP-1310 and Cisco GLC-T,but also have BIDI,DDM,DWDM SFP transceiver.Welcome to you to find some cisco SFP Transceivers.

Fiberstore is an online store that sells some high quality optical products in China, such as: fiber splitter, fiber optic test instrument, optical fiber cable, optical fiber tools(Fiber Optic Cutter,Fiber Optic Tool Kits,phone tester).Today, we will introduce three selling fiber optic tools from fiberstore.

First tools - Fiber Optic Cutter is made of high carbon fiber Kevlar specializing in the treatment of long service life, no difficult to cut in the Kevlar strength member of the cable.Optical fiber aramid knife is the high carbon steel, after special processing, long service life, no fault cuts with Kevlar fiber optic cable. Lightweight and compact, these cutters have a full-serrated edge for consistent, fast and clean cuts.

Second tools - Fiberstore provides many types of optical tool kit, which is very important in optical fiber installation and maintenance works. Because it can make work easier, it can bring some type of fiber optic tool kit. The kit used tools are carefully assembled, and stored in a high quality case, keep them safe, clean, normal working state. A splicing optical fiber tools, testing tools and cleaning fiber optic fiber in its tool. Splicing tool used in the fiber optic splice includes optical fiber cutter, welding joint, an optical fiber splice protection sleeve, heat oven test optical fiber tools is used to check the optical equipment manufacturing process or troubleshooting.

Fiber Optic Tool Kits from fiberstore are built to accommodate all types of fiber systems and connectors. Whether you are terminating, testing, restoring, inspecting or cleaning fiber optic cabling and networks, downtime is your biggest enemy. Fiberstore features some different fiber kits to handle all aspects of servicing fiber systems from splicing, crimping, stripping and polishing to testing, restoring, inspecting and fiber safety.

Third tools - Telephone line tester is a new type of safety line fault tester multifunctional capabilities. In addition to being a common telephone line testing instrument function, it also has a high voltage protection and dangerous voltage warning.

A phone tester is used for testing a digital or analog telephone systems, as well as line polarity. Telephone line tester is a good personal and professional use. For example, in your notebook computer is connected to the unknown telephone system, when you go out in the outside, it is important to check the line. It can protect your modem digital telephone network in common high current.

There are various types of fiber optic tools being used in the fiber optic installation and maintenance works from fiberstore. Fiberstore provide a wide range of hand fiber optic tools and tool kits. Used a Fiber Optic Tool Kits that can make the installation and maintenance of your network a whole lot easier! What tools do you need，I think fiberstore can help you.

Your best source on the Internet for fiber cabling and connectivity products in fiberstore.Cat 5e UTP Patch Cables are suitable for all your data and network requirements. They are using the flexible conductor Cat 5E UTP (unshielded twisted pair) cable and can be obtained from the 0.25mtr 10 different color 20mtr in most color, to a limited extent, now at 50mtr.Cat5e network cable has a flush molding guide. Usually used for network 100 Mbit / s Ethernet and Gigabit Ethernet network, can be used up to 100 MHz.

Category 5 cable is the most commonly found networking cable in homes around the world. While there are other means of transmitting data in an enterprise environment, all homes connected to the Internet has some form of patch cable. This is the thick wire that runs from your modem to your computer and has large telephone style connectors on the end. It’s made up of eight smaller color-coded wires, protected by an outer sheathing. The connectors on either end are called RJ45s and they are standard for all Cat5 networking cables.

The cable is available in both stranded and solid conductor forms. The stranded form is more flexible and withstands more bending without breaking and is suited for reliable connections with insulation piercing connectors, but makes unreliable connections in insulation-displacement connectors (IDCs).

The solid form is less expensive and makes reliable connections into insulation displacement connectors, but makes unreliable connections in insulation piercing connectors. Taking these things into account, building wiring (for example, the wiring inside the wall that connects a wall socket to a central patch panel) is solid core, while patch cables (for example, the movable cable that plugs into the wall socket on one end and a computer on the other) are stranded. Outer insulation is typically PVC or LSOH. The specific category of cable in use can be identified by the printing on the side of the cable.

FiberStore provide a wide range of optical-fiber options so that our customers have the flexibility to choose a cable plant to best fit their needs. Only optical fiber that meets or exceeds industry standards is used to ensure quality products with best-in-class performance.For example,the Bulk Fiber Optic Cables including about Outdoor Fiber Optic Cable,FTTH Fiber Cables,Fiber Armored Cable,Indoor Fiber Optic Cable and so on from Fiberstore.

To introduce fiber optic cable, how can we not talk about the partner of fiber patch panel.Fiber Patch Panel is to terminate the fiber optic cable and provide connection access to the cable's individual fibers. Fiber patch panels are termination units, which are designed to provide a secure, organized chamber for housing connectors and splice units. In addition, the panel creates a safe environment in which to work with exposed fibers. They provide protection to the optical fiber and the components inside the closure body and linking to the outside equipment by the adapters installed on the fiber patch panels.

Fiberstore provides a standard 19 inch fiber optic distribution frame. Their type, to accommodate from 12 core to 72 fiber management needs. These optical distribution frame is optional fiber adapter, fiber pigtail, types include SC, LC, ST, FC, MU, E2000 etc.Fiberstore also has some other fiber optic cables,if you need some fiber optic products,welcome to fiberstore.You may find what you need.

SFP (small form-factor pluggable) is a compact, hot-pluggable transceiver used for both telecommunication and data communication applications. It interfaces a network device mother board to a fiber optic orcopper networking cable. It is a popular industry format jointly developed and supported by many network component vendors. SFP transceivers are designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards.Fiberstore supply various kinds of SFP module such as DWDM SFP,BIDI SFP.

DWDM SFP:

Fiberstore Dense Wavelength Division Multiplexing (DWDM) optical transceivers provide DWDM transport to greatly reduce the power consumption and the cost of standard pluggable small form-factor pluggable (module) package. Our sfp dwdm is available in all 100 GHz C/L-band wavelength wavelength division multiplexing International Telecommunications Union. Their aim was to Multi-Source Agreement (MSA) standards to ensure compatibility with the majority of network equipment. As a multi-rate interface to support any protocol from 100 seconds to 4.25 seconds. The module is hot-pluggable and digital diagnostic functions via a serial bus specified Maritime sff-8472 program.

Gigabit Ethernet standard to meet the requirements of the module IEE E802.3 standard specifications and Fibre Channel interconnect, they are suitable for the environment in Gigabit Ethernet and Fibre Channel. Characteristics of DWDM is the specified standard g.692 and g.694.1 of fully compatible with the wavelength parameters.

BIDI SFP:

SFP BiDirectional (BiDi) optical transceivers utilize innovative wavelength division and packaging technology to transmit and receive optical signals through only one single fiber (single mode or multimode). SFP BIDI Transceiver is a high performance, cost effective module, which is compliant with LC/SC Optics interface with built in WDM for Bi-Directional serial optical data communication applications and Standard AC coupled CML for high speed signal and LVTTL control and monitor signals. The deployment of BiDi optical transceivers instantly doubles the bandwidth capacity of the existing optical fiber infrastructure. Our SFP BiDi optical transceivers also comply with Small Form Pluggable (SFP) Multi-Source Agreement (MSA). SC connector interface is also available upon special request.

Fiberstore supply the SFP BiDirectional including about BiDi sfp 20km,BiDi sfp 40km,BiDi sfp 80km on three Transfer Distance.It s compatbile with all brands including Cisco, HP, Huawei, Nortel, Extreme, Juniper, etc. Please specify the brand name of your system when you make the order. Without your specify, we will make Cisco Compatible as default compatible brand.

FiberStore is an professional manufacturer and supplier of transceivers.All of our transceivers are tested in-house prior to shipping to guarantee that they will arrive in perfect physical and working condition. We guarantee transceivers to work in your system and all of our transceivers come with a lifetime advance replacement warranty.Welcome to you to order the DWDM SFP,BIDI SFP or other fiber optic products from fiberstore.

Fiber Patch Cable also known as fiber jumper or fiber patch cord, which is a fiber optic cable terminated with fiber optic connectors on both ends.FiberStore.COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.

Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.

Fiberstore supply fiber patch cables lc to lc duplex multimode fiber optic patch cables, these cables are with typical 50/125 and 62.5/125 optional multimode fiber, the cable diameter is 2mm or 3mm.

LC fiber cable is with a small form factor (SFF) connector and is ideal for high density applications, which has a zirconia ceramic ferrule measuring 1.25mm O.D. with either a PC or APC end face, and provides optimum insertion and return loss. The LC fiber patch cable connector is used on small diameter mini-cordage (1.6mm/2.0mm) as well as 3.0mm cable. LC fiber cable connectors are available in cable assembled or one piece connectors. The LC fiber optic assembly’s family is Telcordia, ANSI/EIA/TIA and IEC compliant.

FiberStore offer single mode and multimode optical fiber patch cable, fiber jumper, fiber patch cord with a variety of connector types such as st lc fiber patch cable and so on.

Fiber optic attenuator is used in the fiber optic communications to reduce the optical fiber power at a certain level, the most commonly used type is female to male plug type fiber optic attenuator, it has the fiber connector at one side and the other side is a female type fiber optic adapter, fiber optic attenuator name is based on the connector type and the attenuation level. The fiber optic attenuator is fit to use optical fiber jumper.

LC fiber optic attenuators are UPC and APC types, to fit for the according LC connectors. LC UPC fiber optic attenuator return loss is more than 55dB, LC APC fiber optic attenuator return loss is more than 65dB. Working range of the LC fiber attenuator is 1240nm to 1620nm, including the typical 1310nm and 1550nm single mode applications. They are constructed of the highest quality materials and every piece is tested during production. The lc fiber optic attenuator is used with fiber amplifier, DWDM and telecommunications equipment. We supply single mode LC/APC, LC/UPC fiber optic attenuators including the bulkhead (Flange type) LC attenuator and female to male LC fiber attenuator. Attenuation range available is from 1dB to 30dB.

You can buy the special requirements of optical fiber jumper. Fiberstore can interact with your original design as a manufacturing outsourcing partner or help you quickly achieve customized answer requirements of optical communication products.We often supply some other fiber optic products,welcome to look for fiber patch cables or fiber optic attenuator in fiberstore.

At Fiberstore.com, we can find a number of fiber optic products including various kinds of fiber optic transceivers. SFP transceivers are one of our promotional products that feature stable quality, cheap prices, fast delivery and 100% compatibility for some major brands(such as Netgear SFP,Marconi SFP).

Fiber optic transceivers used in Ethernet cable can not be covered, must be used to extend the transmission distance of optical fiber in the actual network environment, at the same time help the fiber last kilometer line is connected to the metropolitan area network and the outer layer of the network also played a huge role.

In order to guarantee and other manufacturers of network card, repeaters, hubs and switches and other network equipment are fully compatible, fiber optic transceivers products must be in strict compliance with 10Base-T, 100Base-TX, 100Base-FX, IEEE802.3 and IEEE802.3u Ethernet standards.

In addition, in the EMC electromagnetic radiation shall comply with FCC Part15. Nowadays as the major domestic carriers are to promote the construction of community network, campus network and enterprise network, thus the fiber optic transceiver products consumption is also rising, to better meet the needs of the construction of access network.

Fiberstore is a leading manufacturer and supplier of fiber optic transceiver. They have a large quantity of Netgear SFP Transceivers in stock and can ship you within 24 hours. All of the transceivers are tested in-house prior to shipping to insure that they will arrive in perfect physical and working condition.

SFP transceivers are available with a variety of transmitter and receiver types, allowing users to select the appropriate transceiver for each link to provide the required optical reach over the available optical fiber type (e.g. multi-mode fiber or single-mode fiber). Optical SFP modules are commonly available in several different categories:

1.For multi-mode fiber, with black or beige extraction lever

SX - 850 nm, for a maximum of 550 m at 1.25 Gbit/s (Gigabit Ethernet) or 150m at 4.25 Gbit/s (Fibre Channel)

2.For single-mode fiber, with blue extraction lever

LX - 1310 nm, for distances up to 10 km BX - 1490 nm/1310 nm, Single Fiber Bi-Directional Gigabit SFP Transceivers, paired as BS-U and BS-D for Uplink and Downlink respectively, also for distances up to 10 km 1550 nm 40 km (XD), 80 km (ZX), 120 km (EX or EZX) CWDM and DWDM transceivers at various wavelengths achieving various maximum distances

3.For copper twisted pair cabling

1000BASE-T - these optical modules incorporate significant interface circuitry and can only be used for Gigabit Ethernet, as that is the interface they implement. They are not compatible with (or rather: do not have equivalents for) Fibre channel or SONET.

The main brand, such as Cisco transceiver, HP transceiver, 3Com transceiver, Finisar transceiver，Juniper transceiver, Foundry transceiver, Extreme transceiver, Netgear SFP transceiver, Force10 transceiver, Brocade transceiver, Dell transceiver, Enterasys transceiver and etc.Welcome to FIberstore.