In a fiber optic network high speed connection, always require some type of equipment. And fiberstore supply some fiber optic products(such as Optical transceiver),our production and marketing of the products are high quality and low price.

Fiberstore's Cisco provides a series of small form-factor pluggable ( SFP ) Gigabit Ethernet and fibre channel using.The small form-factor pluggable (SFP) Fiber Optic Transceiver supports data rates up to 10 Gbit/s. SFP Fiber Optic Transceivers are available with a variety of transmitter and receiver types. These small, modular optical interface transceiver provides a convenient and cost-effective solutions, through the Gigabit Ethernet and fibre channel data center, park, metro access network and the ring network, and a storage area network.

The Cisco industry standard 1000BASE-T ( SFP ) small form-factor pluggable Gigabit interface converter ( GBIC ) is a kind of hot swap of the input / output device is inserted into the Gigabit Ethernet ports or slots, and the network connection port. Cisco SFP providing full duplex Gigabit Ethernet connection, high-end workstations, and in the existing copper network infrastructure of the wiring between the chamber.

Fiberstore's cisco sfp glc-t support hot plug, so that at the time of deployment, equipment does not need to restart. Our GLC T SFP products are fully compatible with Cisco routers and switches, they provide full duplex Gigabit Ethernet links to high-end between wiring closets over existing copper network infrastructure.

The Cisco GLC T SFP maximum span of 100 meters of category 5 Cabling is a Mini GBIC transceiver work. GLC T SFP Gigabit Ethernet compatible with 1000BASE T standard. This is the standard SFP package, to adapt to the Cisco router or switch. Fiberstore supply cisco glc-t module and related SFP modules.

FiberStore produce and stock for a full range of fiber optical transceivers and offers a variety of pluggable transceivers using 850, 1310 and 1550 nm lasers. This includes 4/2/1G SFP, 10G XFP, SFP+ and 30G SNAP12 parallel modules, along with optical components for various reaches. All of these meet the needs of diverse data-rate and reach requirements. Buy with confidence. We can customize optical transceivers to fit your specific requirements. Contact us via sales@fiberstore.com,if you can't find the item which you need.

Fiberstore Cisco SFP provides full-duplex Gigabit Ethernet connectivity to high-end workstations and between wiring closets over existing copper network infrastructure.The Cisco industry-standard 1000BASE-T Small Form-factor Pluggable (SFP) gigabit interface converter (GBIC) is a hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network. Fiberstore supply the fiber optic transceiver such as SFP copper module GLC-T.

SFP (small form-factor pluggable) is a compact, hot-pluggable transceiver used for both telecommunication and data communication applications. It interfaces a network device mother board (for a switch, router, media converter or similar device) to a fiber optic orcopper networking cable. It is a popular industry format jointly developed and supported by many network component vendors. SFP transceivers are designed to support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards. Due to its smaller size, SFP obsoletes the formerly ubiquitous Gigabit interface converter (GBIC); the SFP is sometimes, erroneously, referred to as a ‘Mini-GBIC’(although no such device has ever been defined in the MSAs).

Fiberstore GLC-T is identical to the Cisco GLC-T in all aspects: form, fit, and function.GLC-T Copper Small Form Pluggable(SFP) transceiver is high performance, Our cisco glc-t sfp is fully compliant with the SFP Multi-Source Agreement, or MSA, and with the 1000BASE-T standards as specified in IEEE 802.3-2002 and IEEE 802.3ab, which supporting 1000Mbps data-rate up to 100M reach over unshielded twisted-pair category 5 cable.Like all SFPs, the GLC-T is hot-swappable.

cisco glc t datasheet:

   1)Hot-swappable input/output device that plugs into a Gigabit Ethernet port or slot, linking the port with the network
   2)Interfaces/Ports: 1 x 1000Base-T LAN; Interfaces/Ports Details: 1 x RJ-45 1000Base-T
   3)Connectivity Media: Category 5 UTP 1000Base-T; Distance Support: 328 ft UTP; Data Transfer Rate: 1 Gbps Gigabit Ethernet Full-duplex
   4)MTBF: 1000000 Hour Predicted
   5)Power Consumption: 1.10 W
   6)Manufacturer: FiberStore
   7)Cable Type: Copper

FiberStore offers cost-effective standards-based compatible cisco SFP Transceivers. As a 3rd party OEM manufacturer, our Cisco SFP transceiver is delivered to worldwide from our factory directly. All of our Cisco SFP module are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition.All our fiber transceivers are 100% compatible with major brands like Cisco, HP(such as hp procurve j9150a), Juniper, Nortel, Force10, D-link, 3Com, and backed by a lifetime warranty.Welcome to focus on fiberstore.

In the Fiberstore, we can find a number of fiber optic products., We provide a full range of models and types like fiber-optic cable stripper and flange fiber adapter.

Fiber Cable Stripper

Fiberstore supply many types of fibre optic strippers. The fiber stripper plays an important role in fiber optic cable splicing process. A good quality fiber stripper will safely and efficiently remove the outside jacket from an optical fiber cable, and can help you speed up the process of performing fiber network maintenance work and avoid excessive network downtime. Only with a properly strip of the fiber cable jacket can make an undamaged exposed fiber which is also a must for successful splicing of two optical fibers. Explore the stripping tools below to find exactly what you need.

Stripping is the act of removing the protective polymer coating around optical fiber in preparation for fusion splicing, so a good quality fiber stripper will safely and efficiently remove the outside jacket from an optical fiber cable, and can help you speed up the process of performing fiber network maintenance work and avoid excessive network downtime. We FiberStore.com supplies various of high quality fiber optic stripper for customer to choice.

Flange Fiber Optic Adapters

A fiber adapter (also called as flange) is a fiber connection component. It includes many varieties such as FC, SC, ST, LC and MTRJ. Fiber adapters are widely used in ODF, fiber transmission equipment and instrument etc. We supply LC, FC, SC, ST and MTRJ fiber optic adapters, including simplex, duplex and quad types; these Simplex or Duplex Multimode or Single-mode or 10G OM3 Adapter come with flange and are Zirconia. Fiberstore provide many kinds of fiber optic adapters like FC to FC fiber adapters,SC to SC fiber adapters,ST to ST fiber adapters,LC to LC fiber adapters,there are many, we can not enumerate.If you need some fiber adapter,you can be found in fiberstore.

Fiber Adapter Functions:

1)A cable to cable fiber optic connection
2)Cable to equipment fiber optic connection

Fiberstore supply many types of fiber optic products, including Fiber Optic Tool, Fiber Cabling,Fiber Optic Modem(such as hot seller product RS-232 to Fiber Converter) ,Fiber Patch Cable and so on.You can buy fiber optic connection products on our store with your confidence. If you interested in our fiber optic products,welcome to fiberstore.

Hot seller part 1-The network cabinets wall mounted.Wall mounted 19″ network cabinets available in portable wall mounted network cabinet 4U to 18U for networking. Applications include Cat-5E and Cat-6 patch panels, network switches, telephone systems, AV, CCTV security cameras and DVR’s. Standard features include reversible transparent tempered safety glass front door, removable side access panels, heavy duty construction, locks on front door and side panels, generous ventilation slots and ventilated shelf, top and bottom cabling access slots, adjustable front and rear rails, cage nuts (15 sets) supplied. Heavy duty construction allows 60KG loading capacity. Supplied fully assembled. Black power coated finish. IP20 rated. Wall Mount Network Cabinet is perfect for safely mounting routers, switches, media converter, and other networking equipment.

Fiberstore offers a wide selection of wall mount network cabinets that can accommodate a variety of network and IT applications. These cabinets offer users convenience, adaptability and versatility, while their sleek design allows them to blend in perfectly in an office or business environment. Fiberstore creates top quality wall mount, desktop and free standing network cabinets and server racks for IT and network equipment. Their sturdy design will help keep equipment safe.The standards are ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GB/T3047.2-92.

Main material:
1. SPCC cold rolled steel;
2. Thickness: mounting rail: 1.5mm, others: 1.2mm
3. Surface finish: Degreasing, pickling, phosphoric, powder coated
4. Loading capacity: 60KG

Part 2-The New Ilsintech Swift-F1 All in One Fusion Splicer.The Swift F1 has been designed for fusion splicing and splice-on connector (Swift Connector) of FTTH network applications.The swift f1 fusion splicer is the highly sophisticated and integrated clad alignment, which has been designed to perform the major 5 multifunctional features systematically: heating, stripping, cleaning, cleaving, splicing and sleeving.The Swift F1 is a versatile fusion splicer which can perform all kinds of FTTH fusion splicing for the ordinary 0.25mm, 0.9mm, 2mm~3mm cable, indoor cable and others splicing connectors.

Swift-F1 is state-of-art FTTH fusion splicer is designed to offer easier, more convenient and faster fiber optical cable preparation work in the field by integrating 5 functions into one single unit.Swift-F1 is also designed for fusion splice-on connectors. Combination of the five key functions of Swift-F1 with Swift Connector (splice-on connector) enabled solving splice quality, durability, and A/S cost problems of mechanical splice (V-groove) connection. By drastically lowering manufacturing cost of splice-on connector, installation cost is lowered more than 15%; reversing existing idea that splice-on connection is much more expensive than V-groove connection.

You don’t have to carry the fiber cleaver, thermal stripper and fiber cleaner separately. The High Precision Fiber Cleaver, Automatic Thermal Fiber Stripper, Fiber Cleaner and Heat Shrink Oven are all conveniently mounted on top of the Swift-F1 splicer, this design drastically reduces splicing time.

There have some HP SFP+ transceiver for sale in fiberstore,including:HP J9150A, HP J9151A, HP J9152A, HP 455883-B21.Today I will focuses on the HP J9150A.

The hp procurve j9150a series multi-mode transceiver is SFP+ module for duplex optical data communications such as 10GBASE-SR and 10GBASE-SW. It is with the SFP+ 20-pin connector to allow hot plug capability. Fiberstore HP 10GBase-SR SFP+ in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 300 m on multimode fiber. Digital diagnostic functions are available via an I2C. This module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm

Specification

Manufacturing Part Number: J9150A
Form Factor: SFP+
Device Type: Transceiver module
Interface (Bus) Type: Plug-in module
Connectivity Technology: Wired
Application: 10GBASE-SR
Data Transfer Rate: 10Gbps
Wavelength: 850nm
Max Distance: 300m
Fiber Type: MMF
Connector: Duplex LC
DDM: With DDM
Operating Temperature: Standard 0~70 °C

Applications

10GBASE-SR at 9.953Gbps
10GBASE-SW at 10.3125Gbps
1000 Base-SX Ethernet
8XFC at 8.5Gbps
4XFC at 4.25Gpbs
850nm VCSEL Transmitter
2XFC at 2.125Gpbs
1xFC at 1.0625Gbps
Duplex LC Connector Interface, Hot Pluggable
Other Optical Link.

We offer a fair of the hp j9150a price in fiberstore.

The FiberStore transceiver package types including:SFP+ (SFP Plus), X2, XENPAK, XFP, SFP and GBIC and other configurations to serve a variety of reaches and data-rates from 100Mb/s to 10Gb/s.Our fiber transceivers are 100% compatible with major brands like Cisco(Cisco SFP+, Cisco X2,cisco xenpak-10gb-sr ect ), HP, Juniper, Nortel, Force10, D-link, 3Com, and backed by a lifetime warranty.Welcome to look at our FiberStore,we have a full range of fiber optic products in china.

There is a broad range of Industry compliant SFP+, Xenpak, X2 and XFP modules for 10 Gigabit Ethernet deployments. 10GBASE SFP+ modules(cisco 10gbase-sr sfp module, LR, ER, ZR) offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Xenpaks(XENPAK SR, LR, ER, ZR) are supported on Cisco routers and some Catalyst switches. The small form factor X2s(X2 SR, LR, ER, ZR) are supported on the Cisco Catalyst Switches. XFPs(XFP SR, LR, ER, ZR) are supported on Cisco routers with Shared Port Adapter (SPA).They provide customers a dual-rate interface for 10 Gigabit Ethernet and Packet-over-SONET/SDH (POS) connectivity.

For instance, the SFP+ is available for the Cisco Nexus 7000 Series and Cisco Nexus 5000 Series. The new transceiver is expected to propagate across the Cisco Catalyst 6000 Series Switches, including incorporation in new line cards for the Cisco Catalyst 6500, as well as to the next-generation Cisco Catalyst 4500 Series and Cisco Catalyst 3000 Series Switches. The Catalyst 3560-X switch supports the SFP+ module patch cable, a 0.5-meter, copper, passive cable with SFP+ module connectors at each end. The patch cable connects two Catalyst 3560-X switches in a cascaded configuration. The cisco sfp-10g-sr module supports a link length of 26m on standard Fiber Distributed Data Interface (FDDI)-grade multimode fiber (MMF). Using 2000MHz*km MMF (OM3), up to 300m link lengths are possible. Using 4700MHz*km MMF (OM4), up to 400m link lengths are possible.

Research for cisco sfp-10g-sr compatibility is important. If we kown the compatibility of this module well, it can improve its performance on Cisco switches. The 10G SFP+ is an upgraded version of SFP (Mini-GBIC) optical module. Comparing with the other form optical transceiver module, SFP+ (SFP plus) has higher datarates than SFP module, but smaller size than XFP, X2 and Xenpak modules. Cisco SFP 10G SR is 10GBase SR compliant and work at 850nm, it is in standards SFP+ package to plug into the ports or slots on Cisco equipment, optical interface is duplex LC connector.

Fiberstore is an original manufacturer of SFP+ transceiver. Our SFP+ Transceiver supports Ethernet, Fibre Channel, and Sonet/SDH applications across many switching and routing platforms. If you have any needs for SFP+ modules, pls feel free to contact us.

Fiber Optic Patch Cables, often referred to as the fiber optic patch cord or fiber jumper cable, and fiber optic cable terminated on both ends of an optical fiber cable. It has two main areas of application: computer workstation socket and optical fiber distribution frame, optical cross connecting distribution center. Optical fiber cable for indoor use only.Single-mode fiber patch cable is mainly used for applications involving extensive distance. However, the multimode optical fiber jumper, is the most common optical system, is much cheaper than the preferred equipment cable.

Connector Types:

Same connector type fiber patch cords: This fiber optic patch cable has the same type of connector on both ends, such as ST, SC, LC, FC, etc. Hybrid fiber optic patch cords: This fiber optic patch cable has different connectors on each end. One end can be SC and the other end can be LC, ST, FC, etc.

I want to share with you what I know fiber optic knowledge with OTDR.OTDR (Optical time-domain reflectometer ) is classic fiber optic test equipment used to characterize an optical fiber. It is most easy to use but it is also one of the most expensive, OTDR could give you an overview of the whole system you test. OTDR may be used for estimating the fiber optic cable length and fiber optic cable overall attenuation. It may also be used to locate faults, such as breaks, bend and so on by measuring the return loss. The common types of OTDR-like test equipment are: Full-feature OTDR, Hand-held OTDR, Fiber Break Locator, RTU in RFTSs.

Fiberstore is specializing in supplying fiber optic components and network equipment, and we are trying to complete this system. For the OTDR, we provide one year warranty for each domestic and foreign brand product.The yokogawa odtr price is most favorable, if you are interested in, welcome to fiberstore.

FiberStore also supply a range of Fiber optic data modem,such as rs232 to fiber converter/RS-485/RS-422 Fiber Optic Modem ,multimode or single-mode fiber, transmission distance up to 2km (multimode) or up to 20km/40km/60km (single-mode).

Fiber optic crimp tool is a tool designed to crimp or connect a connector to the end of a cable.Today, let me introduce one of two kinds of fiber optic hand tools:ht210c modular crimping tool and phone line tester

The ht210c modular crimping tool,An easy to use hand tool suitable for crimping FCC68 (RJ45) modular plugs, commonly used in data communications.

Description

This is a deluxe type crimping tool that is made of steel and is light weight, compact and durable with key way in 8P modular holder.

Features

For crimping modular plug 8P8C (RJ45) in parallel action Cutting and stripping wire by one operation Easy and efficient With round cable stripper Light-weight, durable and compact

And the phone line tester is a new kind of line fault tester with safety & multi-functions capabilities. Besides the functions as a common Tel Line Tester, it also has the functions of high voltage protection and dangerous voltage warning.A phone line tester is used for detecting either digital or analog phone systems as well as the line polarity.

There are various types of fiber optic tools being used in the fiber optic installation and maintenance works. Fiberstore provide a wide range of hand fiber optic tools and tool kits. (e.g.,Hand Tools: Network cable tester,phone line tester, fiber cable stripper, fiber cable slitter, crimping tool, fiber optic cutter,Fiber Optic Cleaver punch down tool and so on. Tool Kits: fusion splicing tool kits, fiber optic termination and testing kits, optical fiber construction tool kits and so on. )

Optical cross connects (OCCs) are versatile, fully enclosed cabinets designed for fiber optic rack-mountable hardware. All products in this family offer modular design for incremental growth and are ideal as outdoor protected environments for cross connect installations.

This product is designed for the connection between the Optical fiber cable and the main points, and it is a kind of port device. It has the function of direct or indirect connection, coiling, storage, and dispatching on the fiber cable. Cabinets are made of double side wiredrawing stainless steel, with the protection grade reaching fiberglass-reinforced polyester can endure climate changes and adverse environment. All front access. Suitable for ribbon and no ribbon optic fibers;30 oblique installation of adapters, preventing eyes from laser’s hurts and ensuring the fiber bending radius; Suitable for inserting installation of SC, FC, ST(additional flange) adapters; The bending radii are ensured to be more than 40mm in anyplace. Reliable fiber introduction, grounding and fixing, suitable fiber integrated and optical fibers.

Compatible with Corning Cable Systems rack-mountable hardware, these Optical cross connect cabinets can accommodate many combinations of connector, splice and coupler housings. This modular system makes it possible to create fiber optic configurations for outdoor applications. LDC Connector Module Housing Units for installations using field connect orization or factory stubbed housings. Stubbed housings with outdoor cable are available and can be spliced into the network using one of the many Corning Cable Systems splice closures. Furcation kits for field installation of connectors in an outdoor environment are also available to protect the fibers. In addition, splice housings can be used for pigtail splicing inside the cabinet. The pad-mountable version (-G) requires the PAD-OCC-01 for the 31-G and 51-G or the PAD-OCC-02 for the 80-G. The pad-mountable frame aids in construction of the pad and installation of cables. The galvanized steel frame provides a properly sized opening in the pad for cable entry and contains threaded inserts for accurately mounting the cabinet during installation.

Modular design of Fiber Cross-connection Cabinet provides the largest flexibility; satisfy the needs of the present and future development. The body using the stainless steel and surface using electrostatic spray so it has good corrosion resistance and anti-aging function, the wind protection class of the body achieves the IP66 level. The effect of defense dewing is excellent. The module tray can spin out of 90 degrees around the axis in the left front, and the bevel of the adapters within the module takes on 30 degrees. The clip-locked installation ensures the bending radius of the fiber directly and prevents the eyes from injury. Weld disk can spin out of 90 degrees, and then draw out, so it is convenient to construction, and also convenient to expansion and maintenance. Have doors in the front and back, have ample space for cabling, convenient to operation and maintenance. Have reliable device for fastness, peeling and grounding of the optical cables. Insulation resistance between high voltage protection earth and box20,000MΩ /500V (DC)

Fiberstore offers optical cross connect closures with excellent defense dewing effect, good corrosion resistance and anti-aging function fiber optical cross connect cabinet is used as the interface device at the splice of the trunk cable and wiring cable in the access network. It is mainly used for the connection, distribution and scheduling of the outdoor cables, and it could actualize the weld, terminal, storage and scheduling of the optical fibers.