The rapid development of information construction, the growing demand for data, voice, image and multimedia communications, Ethernet broadband access therefore be referred to the increasingly important position. With the continuous development of the information age, the transceivers are constantly updated. For example, X2 transceiver is the 10G fiber optic transceiver, its development was based on former Xenpak standards, X2 10gb transceiver inner function is almost similar with Xenpak, and X2 also can use one transceiver to fulfill all 10G Ethernet optical port function. X2 transceiver is about half size of Xenpak, this enable it suit for density installations.

Today , I will introduct some general knowledge of 10GBASE-LR. The 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber (SMF, G.652). Cisco X2 10GB LR is single mode 10GB transceiver works with 1310nm, its max working distance is 10km, the X2 10GB LR is compatible to IEEE 802.3ae for 10G Ethernet, it is plug in modules used on network equipment to connect to fiber optics.

Fiberstore 10GBase-lr x2 use dual SC optical interface, It is a hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the port with the network.The X2-10GB-LR is a highly integrated、Serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4×3.125Gbps Ethernet Signal Input by XAUI Interface.An integrated Coder / Decoder and multiplexer / demultiplexer (SERDES: Serializer / Deserializer). X2-10GB-LR is designed for 10km Transmission with a vertical cavity surface emitting laser (VCSEL). This X2 10gb transceiver Digital diagnostics functions are available via a 2-wire serial interface.

X2 10GB LR Features

Compatible with X2 MSA Rev2.0b
Support of IEEE 802.3ae 10GBASE-LR at 10.3125Gbps
Transmission Distance up to 10Km(SMF)
SC Receptacle 1310  DFB  Laser
SC Duplex Optical Connector
Hot Pluggable 70-PIN Connector with XAUI Electrical Interface
Management and control via MDIO 2-wire interface
Power Supply :+3.3V, APS(+1.2V)
Diagnostic Optics Monitoring
Temperature Range: 0~ 70 °C
ROHS Compatible 

X2 10GB LR Applications

10GE Ethernet switches and routers
10GE Core-routers
10GE Storage
Other 10Gbps Ethernet Transmission System

Fiberstore is a leading manufacturer and supplier of fiber optic products. All of our X2 10GB LR transceivers were strictly tested for compatibility during production and before delivery to make sure that you receive the product in good physical and working condition, X2 10GB LR from Fiberstore is brand new and equivalent products, they feature the good price and fast delivery.Welcome to our store to buy products.

Are you looking for X2 transceivers or XFP transceivers? If so,to know some good info with them after which ahead to know how and where you can get transceivers at very affordable rates.

X2 was optical transceiver module class, As well as the XFP was optical transceivers class. Those two forms of optical modules reflects two different design ideas, both have their benefits and drawbacks: the advantages of optical transceiver module is extremely integrated circuit design to accomplish an easy circuit design engineers can give attention to system design, do not spend an excessive amount of energy for that realization with the devices about the circuit; drawback is the power use of large, bulky, limiting the number of optical modules attached to the PCB data products can not meet the requirements of port density. The optical transceivers benefit of small size, cheap, simple to apply high port density applications; disadvantage is the high requirements of circuit design inside the ordinary circuit board to accomplish an interest rate of 10 Gb / s, 12 in. transmission distance XFI interface.

With the advancement in technology, a growing number of equipment with latest techniques are now being introduced everyday. This transceiver might be a form factor hot pluggable component designed for 10G system applications consisting fiber channel in addition to 10Gig Ethernet.

FiberStore 10G X2 is a standardized form factor for 10 Gb/s fiber optic transponders which is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It really is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions can be obtained.Fiberstore supply the 10G X2 transceivers including 10GBase-sr x2,10GBase-lr x2,10GBase-er x2,10GBase-zr x2 and so on.Today,I'll introduct itroduction the 10GBase-lr xfp and 10GBase-er xfp to suit your needs.

The developed recognized standard because of this transceiver is called XFP multi source agreement (MSA), that has been created by various companies including Cisco XFP, Juniper XFP, Brocade XFP.FiberStore XFP transceiver is a high end, affordable modules for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s.Consistent with the original XFP multi-source agreement (MSA), these hot-pluggable transceivers possess a common mechanical specification, pinout, and management interface, and fasten to duplex fiber with "LC" connectors.

Fiberstore 10GBase-er xfp transceiver comply with XFP MSA, and can support diverse applications for SDH/Sonet equipment including FEC (9.95Gb/s to 10.7Gb/s), in addition to Ethernet Lan (10.325Gb/s) and WAN(9.95Gb/s) applications. The high performance cooled 1550nm cooled EML transmitter and sensitivity PIN receiver provide superior performance for SONET/SDH and Ethernet applications at approximately 40km links. Digital diagnostics functions can be obtained using a 2-wire serial interface, as specified in the XFP MSA.

Fiberstore 10GBase-lr xfp is hot swappable fiber optic transceiver employed for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data rate from 9.95Gbps to 11.1Gbps, max working distance of the XFP LR fiber transceiver is 10km. XFP-10GLR-OC192SR use dual LC fiber connector interface, its working climate is from -5 to 70 degree centigrade, this fiber transceiver module is to use uncooled 1310nm EML laser and power dissipation lower than 2.5W. The XFP LR is to use integrated digital diagnostic functions. The 10GBase-LR transceivers operate in a 1310nm optical wavelength, and so are created for 9μm (9/125) single-mode fiber as much as 10km, but they are widely used up to larger distances with high-quality fiber.

Fiberstore is really a fiber optic transceivers supplier having a number of fiber optic products in stock prepared to ship for you. If you want to learn more information about our powerful Cisco XFP transceivers, you are able to visit Fiberstore.com or call us via sales@fiberstore.com directly.

Fiberstore supply some high performance X2 transceiver,such as 10GBase-sr x2,10GBase-lr x2,10GBase-er x2,10GBase-zr x2 and so on.Now,inform you good info about X2 transceiver,it's a hot swappable products made for 10Gbps applications. Its development took it's origin from former Xenpak standards, X2 transceiver inner function is almost similar with Xenpak, and X2 also can use one transceiver to fulfill all 10G Ethernet optical port function. To expect half sized Xenpak, this enable it suit for density installations. X2 transceiver is 10G old generation transceiver that less and less employed by operators. Fiberstore X2 transceivers are fully compliant to IEEE 802.3ae standard for Ethernet and the 10GFC Rev. 4 Fibre Channel standard, making it ideally suited to 10 GbE datacom and storage area network (SAN / NAS).

Fiberstore give you the X2-10GB-ER can be a 10GBase-er x2 1550nm 40km transceiver module. The X2-10GB-ER transceiver module supplies a inexpensive high-performance connection. The X2-10GB-ER is 100% compatible with all Cisco series switches and modules which support X2 transceivers.The 10GBase-er we not only have X2 transceiver,but also have XENPAK transceivers,for instance,the kinds of 10GBase-er XENPAK.

XENPAK transceivers from Wikipedia state that the XENPAK is really a Multisource Agreement (MSA), instigated by Agilent Technologies and Agere Systems, that defines a fiber-optic or wired transceiver module which conforms for the 10 Gigabit Ethernet (10GbE) standard with the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group. The MSA group received input from both transceiver and equipment manufacturers throughout the definition process. XENPAK has been replaced by more compact devices supplying the same functionality.XENPAK modules were supplied for physical layer interfaces supporting multi-mode and single mode fiber optic cables and InfiniBand copper cables with connectors known as CX4. Transmission distances change from 100 metres (330 ft) to 80 kilometres (50 mi) for fiber and up to 15 metres (49 ft) on CX4 cable. Newer XENPAKs with all the 10GBase-LX4 standard operated using multiple wavelengths on legacy multi-mode fibres at distances as high as 300 metres (980 ft), eliminating the requirement to reinstall cable inside a building when upgrading certain 1 Gbit/s circuits to 10 Gbit/s.

Xenpak and X2 module are both from the Xenpak standard evolution. Its internal function modules are just do i think the Xenpak ,and the circuit board applications b are same too, also using one module to realize 10G Ethernet optical interface functions. Because of the the Xenpak light module is installed on the circuit board when the circuit board slotted to accomplish more complicated, can not reach the high-density applications. Most of the Xenpak and X2 optical modules volume improved after only Xenpak directly into the circuit board, it really is applied to high-density rack systems and PCI card applications.

Xenpak and X2 optical modules can offer 2 kinds of circuit interface: XAUI and Serial Framer Interface (SFI-4), may be used for10G Ethernet ,can also be useful for OC-192 SDH and 10GFC. It may be said Xenpak and X2 have very similar standard, X2 changes reflected within the rail system compared Xenpak. The generally think that the two specifications could eventually integrate.

Fiberstore features a plethora of fiber optic products in stock and will ship the transceivers to you within A day. All the optical transceiver are tested in-house prior to shipping to insure that they'll get to perfect physical and dealing condition. X2 transceiver vs XENPAK transceiver which transceiver won the competitions.Welcome to Fiberstore.

Fiberstore X2 Transceiver defines an inferior form-factor 10 Gb/s pluggable fiber optic transceiver optimized for 802.3ae Ethernet,ANSI/ITUT OC192/STM- 64 SONET/SDH interfaces,ITUT G.709,OIF OC192 VSR,INCITS/ANSI 10GFC (10 Gigabit Fibre Channel) and other 10 Gigabit applications.X2 Transceiver is initially focused entirely on optical links to 10 kilometers and it is ideally fitted for Ethernet,Fibre Channel and telecom switches and standard PCI (peripheral component interconnect) based server and storage connections,the place where a half size as XENPAK optical transceiver is desired. X2 Transceiver is physically smaller than XENPAK but maintains the mature electrical I/O specification based on the XENPAK MSA and will continue to provide robust thermal performance and electromagnetic shielding.

Fiberstore Cisco X2 fiber optic transceiver module is a hot swappable products developed for 10Gbps applications. Cisco X2 transceiver module support many 10Gbps standards, add some 10Gbps Ethernet, OC192/STM-6 SONET/SDH, OC192 VSR and 10G Fibre Channel.Compatible 10G X2 we also supply, are Cisco 10G Base X2 module, X2-10GB-SR, X2-10GB-LR, X2-10Gb-ER, X2-10GB-ZR etc.We not merely have cisco X2,and involve some other cisco transceivers.

The 10GBase-lr x2 fiber optic transceiver module may be a 1310nm singlemode product with max 10km working span. The X2 fiber optic transceivers utilized in 10Gigabit Ethernet. X2-10G-LR use dual SC optical interface, It is a hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the main harbour with the network. Fiberstore X2-10G-LR fully appropriate for all Cisco series switches and modules which support SFP transceivers.

The X2-10GB-LR can be a highly integrated,Serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4?篓垄3.125Gbps Ethernet Signal Input by XAUI Interface. An internal Coder / Decoder and multiplexer / demultiplexer (SERDES: Serializer / Deserializer). X2-10GB-LR is designed for 10km Transmission using a vertical cavity surface emitting laser (VCSEL). This X2 10gb transceiver Digital diagnostics functions can be bought via a 2-wire serial interface.

Applications

10G Ethernet

Metropolitan Area Network Building Vertical Riser Inter and Intra Campus Data Centers Other Optical Links

Fiberstore may be a leading manufacturer and supplier of fiber optic transceiver. These people have a sufficiency of X2-10GB-LR transceivers in store and may also ship the X2-10GB-LR transceivers to you within A day.Besides X2 Transceiver, We provide CWDM Add/Drop Multiplexer modules(CWDM OADM module),DWDM OADM, fiber optic transceivers and many others.If you'd like to know some facts about X2 Transceiver or CWDM OADM module ,here you are at click www.fiberstore.com .

Your very best self source for fiber transceiver over the Internet from Fiberstore. Including, FiberStore 10G XENPAK transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm,1310nm and 1550nm. Today, we'll learn a little understanding on the 10G XENPAK transceiver in here.Which 10G XENPAK transceiver do you wish to know,for example XENPAK-10GB-ER or XENPAK-10GB-ZR.

First, we take a look at the main of transceiver.Xenpak optical modules packaged inside a 4.8 * 1.4 * 0.7 cubic inches of space, built-in 1 310 nm semiconductor distributed feedback (DFB) laser, direct modulation, no embedded temperature control device. Xenpak on G.652 single-mode fiber transmission distance can reach 10 km, suitable for the employment of the metropolitan area, would be the main port 10G Ethernet products. As well as optical part, the multiplexing / demultiplexing module (MUX / DEMUX) is Xenpak Another primary intent behind the inner parts, Xenpak 50% more power from your multiplexing / demultiplexing module consumes, therefore the light Xenpak larger modules, power consumption in the process.

Next, here are what is 10GBase-er XENPAK.Xenpak 10gb er is Cisco fiber optic transceiver for 10 Gigabit network, Xenpak 10gb er max working distance is 40km, Xenpak 10gb er working wavelength is 1550nm over single mode G 652 optical fiber. Xenpak 10gb er is fully appropriate IEEE standards for 10Gig network; this fiber transceiver dimension is about 121 x 36 x 18 mm and how heavy it is not as much as 300g. Xenpak 10gb er fiber optic transceiver use duplex LC fiber connector interfaces for connecting the fiber optic network. Now we have Cisco equivalent Xenpak 10gb er fiber optic transceivers; these modules are quite good prices and fast delivery.

This 100% Cisco compatible Xenpak 10GB ER is really a 10Gbps XENPAK 1550nm extended reach transceiver. Fiberstore gets the huge discounts Cisco compatible Xenpak 10GB ER handy for fast delivery.

Then, we still realize what XENPAK-10GB-ZR.Fiberstore industry-standard 10GBase-zr XENPAK is actually a hot-swappable input/output device that connects to a Gigabit Ethernet slot, linking the main harbour with all the fiber-optic network. Improve efficiency to your network with Cisco compatible GBIC and GLC optic module upgrades.Fiberstore Now stocks a full collection of both Cisco original and Alternative party Cisco compatible optic modules. In your continuous efforts to give very high higher level of support service, the Cisco XENPAK-10GB-ZR is usually shipped from stock really quick.

Fiberstore offers the XENPAK-10GB-ZR transceiver in store, tested, capable to ship from warehouse, these modules are 100% Cisco compatible together with excellent prices.

Last,have you any idea XENPAK-10GB-ER vs XENPAK-10GB-ZR Technical Specifications .They've already the same which different, the identical Technical Specifications is 10Gbps,1550nm,SC Duplex,Single-Mode Fiber (SMF) and so forth, different technical specifications is XENPAK-10GB-ER Data range: 40km (24.8 miles) and also the XENPAK-10GB-ZR Data range: 80km (49.7 miles) and many others.If you have some other point ,you are welcome to exchange.

FiberStore manufactures complete range of compatible XENPAK transceivers, such us Xenpak 10GB SR, with 300 meters working span, Xenpak 10GB LR, with 10km working distance along with the 40km Xenpak 10GB ER, CWDM XENPAK, DWDM XENPAK. We be sure the XENPAK transceiver to figure in your metabolism as well as our XENPAK includes a lifetime advance replacement warranty.Do you really such as XENPAK transceiver, unless you like it, we've some other type of transceivers, currently transceivers are inexpensive.

SFP+ transceiver,just as its name implies, the SFP+ Transceiver is an upgraded version of the small form-factor pluggable transceiver. The Fiberstore SFP+ Transceiver is more compact in size than its predecessors, X2, XENPAK and XFP, making it the perfect solution for higher port density installations. The Fiberstore SFP+ transceivers are also not only efficient, but cost effective, with a power consumption of less than 1W.

The SFP+ supports data rates up to 10 Gbit/s, 8 Gbit/s Fibre Channel, 10 Gigabit Ethernet and Optical Transport Network standard OTU2. SFP+ transceivers are used as linking the equipment to fiber optic networks. 10G SFP+ offers customer a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.In comparison to earlier XENPAK or XFP modules, SFP+ modules leave more circuitry to be implemented on the host board instead of inside the module.

SFP + is the upgraded version of the SFP, 10G SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet. The 10G SFP+ transceivers are fully compliant to the SFP+ MSA and are hot-swap. Fiberstore 10G SFP+ transceivers meet the requirements of the IEEE 802.3 10GBASE-SR/LR/LRM/LW Ethernet standard and are suitable for interconnections in 10G Ethernet environments.

SFP+ has been replaced the XFP 10G modules and became the mainstream. It has many advantages compared with SFP, XENPAK or XFP modules.

SFP+ Compared with SFP:

SFP has a maximum data rate of 5Gb/s whereas SFP+ is designed for 10Gb/s;

The SFP receptacles and plugs are not as well impedance matched as SFP+ receptacles and plugs;

SFP is based on IEEE802.3 and SFF-8472, but SFP+ is compliance with the protocol of IEEE802.3ae, SFF-8431, SFF-8432.

By now, as the high density data centers and enterprise networks, it is well acknowledged as the ultimate choice for the 10G SFP+ module. 10G SFP+ has become the optical module form factor of choice for 10 Gbps links due to its cost, size and power advantages over other module types.Such as 10GB SFP+ SR,10GB SFP+ LRM,10GB SFP+ LR,10GB SFP+ ER,10GB SFP+ ZR and so on.

Fiberstore is able to offer this upgraded compatible SFP+ transceivers with substantial savings. Fiberstore SFP+ transceivers allow service providers to keep their equipment costs down and still take advantage of the technology of choice for high-speed data transmission applications.Fiberstore supply SFP+ transceivers that are fully compatible with industrial standards, they feature good price and excellent performance.Fiberstore also supply some other types of fiber transceivers.

Fiberstore, a universal leading manufacturer of Fiber Optic Transceiver. All our fiber transceivers are 100% appropriate for famous labels like Cisco, HP, Juniper, Nortel, Force10, D-link, 3Com, and backed by a lifetime warranty. Included in this, Cisco transceiver will be the best-selling transceiver from fiberstore.

Cisco Transceiver Modules support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing platforms. Cisco pluggable transceivers have a convenient and price effective solution for the adoption in data center, campus, metropolitan area access and ring networks, and storage area networks. Cisco portfolio of hot pluggable interfaces supplies a rich range of choices regarding speeds, protocols, reaches and supported transmission media.

In Fiberstore,we stock the Cisco Transceiver including about XFP, SFP , SFP ,X2 ,XENPAK, GBIC and so on.Next, I recently introduce their information with Cisco SFP VS Cisco XENPAK.

Cisco SFP :

Cisco SFP or SFP plus transceivers bring top speed 10Gigabit Ethernet, linking the device to fiber optic networks. This products include active SFP cables and SFP transceivers. There is also copper SFP you can buy from Cisco. SFP is in no way the size 10G transceiver; it truly is much lighter weight and reduced power consumption weighed against former 10G transceivers X2 and XENPAK. The Cisco 10GBASE SFP modules offer customers an array of 10 Gigabit Ethernet connectivity sources of data center, enterprise wiring closet, and repair provider transport applications.SFP module is really a next-generation transceiver module laid out in the ANSI T11 Group for 8.5 Gbps and 10Gbps Fiber Channel and Ethernet applications.

Cisco XENPAK:

Cisco Xenpak is among the Cisco 10Gbps fiber optic transceiver modules, it really is developed in accordance with the Xenpak Multi-source Agreement (MSA) that was instigated by Agilent Technologies and Agere Systems. Cisco Xenpak is fully appropriate for the IEEE 802.3ae standards for 10G Ethernet as needed by Xenpak MSA. Cisco Xenpak dimension is same at 121 x 36 x 18 mm (the biggest in 10G fiber transceiver modules); these modules typically weigh not as much as 300g and with dual SC fiber interface.Cisco compatible XENPAK transceiver support Ethernet, Sonnet/SDH and Fiber Channel applications across all Cisco switching and routing platforms. FiberStore offers cost-effective standards-based Cisco Compatible XENPAK Transceivers.

Cisco SFP vs Cisco XENPAK who do you enjoy? The Cisco transceivers supplied by Fiberstore are economic price but excellent. Their Cisco modules fully tested to be sure the compatibility with equipment from Cisco along with companies. More, they support good price and lifetime advance replacement warranty.

The Cisco 10GBASE X2 modules offer customers lots of 10 Gigabit Ethernet connectivity sources of data center, enterprise wiring closet, and service provider transport applications. Hot-swappable input/output device plugs into an Ethernet X2 port of a Cisco switch or router to link the main harbour while using the network.FiberStore offers cost-effective standards-based Cisco Compatible X2 Transceivers. Being a Alternative OEM manufacturer, our Cisco X2 is shipped to worldwide from our factory directly.

10GBASE-ER is a port type for single-mode fiber and uses 1550 nm lasers. Its Physical Coding Sublayer 64b/66b PCS is determined in IEEE 802.3 Clause 49 as well as its Physical Medium Dependent PMD in Clause 52. It delivers serialized data for a line rate of 10.3125 Gbit/s.

10GBASE-ER provides a reach of 40 kilometres (25 mi) over engineered links and 30 km over standard links.The Cisco 10GBASE-ER Module supports a web link period of around 40 kilometers on standard single-mode fiber (SMF, G.652).The 10GBASE-ER transmitter is implemented using an externally modulated laser (EML).

The Cisco X2-10GB-ER can be a Class 1 laser product. It fully matches the multi-sourcing agreement (MSA) which enables results in most MSA compliant platforms. The X2-10GB-ER have to be operated inside specified temperature and voltage limits. The optical ports within the module would be terminated by having an optical connector or having a dust plug.

Technical Specifications

Platform Support Cisco X2 modules are supported on Cisco switches and routers. For additional information, refer to the document Cisco Xenpak/X2 Compatibility Matrix.

Connectors and Cabling Connectors: Dual SC/PC connector (-SR, -LR, -LRM, -LX4, -ER, -ZR); InfiniBand 4x connector (-CX4); RJ-45 connector (-T).

Note: For optical X2 modules, only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are certainly not supported. All cables and cable assemblies used has to be compliant using the standards specified in the standards section.

Fiberstore is often a leading supplier of 10GBase-er x2. There's an easy range of X2 transceivers on hand and may also ship the X2 transceivers back to you within One day. Our X2-10GB-ER are tested in-house ahead of shipping to insure that they can get to perfect physical and working condition.Find the X2-10GB-ER from us the direct manufacturer you will save much and you should obtain transceivers quickly by worldwide express.

FiberStore XFP transceiver is actually a high performance, cost effective modules for serial optical data communications applications specified for signal rates of 10.30 Gb/s to 11.3 Gb/s. It is actually fully compliant to XFP MSA Rev 4.5. The XFP module also known as XFP transceiver and what is an XFP module? "XFP" signifies "10 Gigabit Small Form Factor Pluggable." With XFP surely you will experience a fast transmission expertise within your computer network together with telecommunication links.

The 10G XFP transceivers concentrate on single mode fiber and operates at a nominal wavelength of 850/1310/1550nm. The transmitter section incorporates uncooled directly modulated 1310nm distributed feedback laser (DFB) or EML colled laser 1550nm. The receiver section uses PIN photodetector for low dark current and ideal responsivity or APD high sensetivity receiver.Fiberstore way to obtain the subsequent fiber optic XFP transceiver products:

XFP-10GB-LR:

Fiberstore 10GBase-lr xfp is hot swappable fiber optic transceiver useful for 10G networks like 10 Gigabit Ethernet, SDH, SONET, XFP LR support data transfer rate rate from 9.95Gbps to 11.1Gbps, max working distance within the XFP LR fiber transceiver is 10km. XFP-10GLR-OC192SR use dual LC fiber connector interface, its working temperature is from 隆搂C5 to 70 degree centigrade, this fiber transceiver module is to use uncooled 1310nm EML laser and power dissipation fewer than 2.5W. The XFP LR is with built in digital diagnostic functions.

XFP-10GB-ER:

Fiberstore 10GBase-er xfp transceiver abide by XFP MSA, and can support diverse applications for SDH/Sonet equipment including FEC (9.95Gb/s to 10.7Gb/s), along with Ethernet Lan (10.325Gb/s) and WAN(9.95Gb/s) applications. Our prime performance cooled 1550nm cooled EML transmitter and sensitivity PIN receiver provide superior performance for SONET/SDH and Ethernet applications at about 40km links. Digital diagnostics functions are offered by having a 2-wire serial interface, as specified by the XFP MSA.

XFP-10GB-ZR:

Fiberstore 10GBase-zr xfp transceiver is the platform for 10G SDH, 10G ZR and 10G Fiber Channel applications. This XFP-10GB-ZR fiber optic transceiver is made up of two sections: The transmitter section incorporates a colded EML laser. Additionally, the receiver section consists of a APD photodiode integrated which includes a TIA. All modules satisfy class I laser safety requirements. XFP transceiver provideds an enhanced monitoring interface, which allows real-time entry to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.This xfp is 1550nm 10GBase-zr xfp 80km single-Mode for 10GbE/10GFC/SDH/SONET Duplex XFP Transceiver RoHS Compliant.

FiberStore produce and stock to get a huge selection of optical transceivers.We now have countless XFP Tranceivers.This informative article describes the products are simply just one small component of XFP Tranceivers.Here you are at Fiberstore.com.

FiberStore 10G X2 can be a standardized form factor for 10 Gb/s fiber optic transponders employed for bandwith rates from 10.3 Gb/s to 10.5 Gb/s. X2 transceiver may be the 10G fiber transceiver, its development was based on former XENPAK standards, X2 10Gb transceiver inner function is nearly similar with XENPAK, and X2 may also utilize one transceiver to satisfy all 10G Ethernet optical port function. X2 transceiver is concerning half sized XENPAK, this enable it suit for density installations. Its electrical interface for the host board is also standardized as well as being called XAUI (4 x 3.125 Gb/s).

Fiberstore method of getting the next fiber optic X2 transceiver products:

The 10GBase-sr x2 is a highly integrated, serial optical transponder module for high-speed, 10Gbit/s data transmission applications. 4x3.125Gbps Ethernet Signal Input by XAUI interface. A Coder/Decoder and multiplexer/demultiplexer(SERDES: Serializer/Deserializer). Designing for 300m Transmission having a vertical cavity surface emitting laser(VCSEL). Digital diagnostics functions can be bought by way of a 2-wire serial interface, as specified by the XENPAK MSA 3.0. X2 10GB SR fiber optic transceiver module support a link of max 300 meters via multimode fiber. It can be applied to 10Gigabit applications including Ethernet and Fibre channel. We feature Cisco compatible X2 10GB SR transceivers that happen to be utilized in 10 GB short reach applications.

The X2-10G-LR fiber optic transceiver module is often a 1310nm singlemode product with max 10km working span. The X2 fiber optic transceivers are being used in 10Gigabit Ethernet. The 10GBase-lr x2 use dual SC optical interface, It is just a hot-swappable input/output device connects to an Ethernet X2 port of your Cisco switch or router to link the port while using the network.Fiberstore offer the Cisco compatible X2 10GB LR transceivers. The X2 fiber optic transceivers widely-used in 10Gigabit Ethernet.

The X2-10GB-ZR fiber optic transceiver is Cisco 10GBASE-ZR X2 transceiver module for SMF, 1550nm wavelength, 80km, SC duplex connector. The X2-10GB-ZR transceiver is actually a Class 1 laser product. It fully matches the multi-sourcing agreement (MSA) which enables it to work in every MSA compliant platforms. X2-10GB-ZR transceiver module is made for single mode fiber, 1550-nm wavelength, SC duplex connector, Fiberstore 10GBase-zr x2 Module offer customers numerous types of 10 Gigabit Ethernet connectivity ways for data center, enterprise wiring closet, and service provider transport applications.

FiberStore manufactures X2 300m, X2 10km, X2 20km, X2 40km, X2 80km optical modules. All modules support Digital Optical Monitoring (DOM) function .After paying attention to a range of X2 transceivers, i really introduced and what one can catch your interest? If you can not interested, you may buy other X2 transceivers inside our store.